The introduction of Hormann HS 5 BS Handset

The Hormann HS 5 BS Handset works on a Secure & Approved Frequency for both you and your property's protection.

The 5 button hand control can be programmed to support up to four doors, lights or electric gates. This unit also features the Door Status Query function allowing you to detect the open and closed position of your garage door from the hand transmitter itself.

This Hormann HS 5 BS Remote Control transmitter will work with your Promatic, Supramatic, RollMatic & Rotamatic garage door operator. It is also fully compatible with Hormann STA & DTA electric gate operator range.

The Satus Query function is only supported by the Hormann Series 3 SupraMatic E, SupraMatic P and ProMatic operators.

· Impulse

· Status query (only for SupraMatic E / P and ProMatic)

· Matt plastic surface with chrome zinc diecast caps

· Protection category: For dry rooms only

· Temperature range: - 20 °C to + 60 °C

· Battery: 1.5 V LR03 / AAA

· Dimensions: 38 × 95 × 16 mm

Includes battery.

Hormann Part No. 436752

Please Note:

This unit fully supports the door status function. This function is only available when using a Hormann series 3 Bisecur operator in conjunction with the HS 5 BS hand transmitter.

This unit is not compatible with any other manufacturers products even if they operate on the same frequency.

The Horman Bisecur range are fully compatible with all Hormann 868.3MHz series operators, including operator series 1 and 2 that are supplied with Grey hand transmitters with blue buttons, see image below.

评论

发表评论

此博客中的热门博文

How do I program a new car key made by the manufacturer?

Losing or damaging your car keys can be a frustrating and stressful experience. Fortunately, most car manufacturers provide options for getting a replacement key, and in some cases, you can even program the key yourself. In this article, we'll explore how to program a new car key made by the manufacturer. First, it's important to note that the process of programming a new car key will vary depending on the make and model of your vehicle. Therefore, it's always a good idea to consult your car's owner's manual or contact your local dealership for specific instructions. Here are some general steps that may be involved in programming a new car key made by the manufacturer: 1. Obtain the new key from the dealership or authorized locksmith: In most cases, you'll need to provide proof of ownership and identification before the dealership or locksmith will provide you with a new key. 2. Insert the new key into the ignition: Once you have the new key, insert it into the
阅读全文

What are the main features of rolling swing gate motor?

图片
  The rolling   swing gate motor control system has the following intelligent functions : 1.  Single and double opening options: through the remote control, single or double gates can be opened and closed at the same time . 2.  Key lock: Through remote control operation, all key functions of the control panel can be locked to prevent theft . 3.  Repetitive operation limit: prevent gate damage caused by wrong operation when the gate is opened in place and overshoot .   1.  Automatic stop in case of obstruction: It can stop automatically when encountering pedestrians, vehicles or obstacles during operation to ensure safety. The blocking force   can be set  in the controller . 2.  Prompt for in place: close the gate in place and lock it, the controller emits a "di —— " prompt sound 3.  Time protection: The single running time of the gate motor is within 60 seconds to ensure the safety of the motor 4.  Infrared protection: through an external infrared detector, when pedestrians
阅读全文

How are automatic door open sensors installed and configured for different environments?

Automatic door open sensors are an essential part of modern building design, providing convenience, accessibility, and energy efficiency. These sensors allow doors to open automatically when people approach, eliminating the need for manual operation and improving accessibility for individuals with disabilities. In this article, we will explore how automatic door open sensors are installed and configured for different environments. Installation of Automatic Door Open Sensors The installation of automatic door open sensors varies depending on the type of sensor and the environment in which it will be used. In general, the installation process involves the following steps: 1. Assessing the Environment: Before installing an automatic door open sensor, it is important to assess the environment in which it will be used. This includes evaluating the size of the door, the amount of foot traffic, and the location of the sensor. 2. Choosing the Right Sensor: Once the environment has been assess
阅读全文