LOW FREQUENCY REMOTE DUPLICATOR QN-RD604B
1.Multi-frequency & auto scan 2. Copy fixed code remote 3.Available Working Frequency Range 27-41Mhz 4.Default frequency is 40.875Mhz PROCEDURE TO COPY: 1)Press and retain pressed 1st button of QN-RD604B and at the same time press 4 times the 2nd button. 2)Release both buttons.So the LED of QN-RD604B will emit a quick flash every 2 sec. 3)Place the original remote control to clone perpendicular to QN-RD604B on its left side (see picture). 4)Press and retain the button to copy of the original remote control and wait till the LED of the QN-RD604B changes the way to flash(faster),it means that the code has been learnt. This may take a few seconds. 5)While the LED flashes,press the button of QN-RD604B where you want to store the code just copied,until the LED switches off. 6)There is a capacitor on board to adjust the intensity of the signal,you have to open the remote case and use a proper tool to do the adjustment(see picture). Note: For this procedure a ceramic screwdriver is n